□
Skip to content
FLAT $150 SHIPPING ON ORDERS OVER $5,000 & FREE SHIPPING ON ORDERS OVER $10,000! DON'T MISS OUT - SHOP NOW!
FLAT $150 SHIPPING ON ORDERS OVER $5,000 & FREE SHIPPING ON ORDERS OVER $10,000! DON'T MISS OUT - SHOP NOW!

ALL PRODUCTS

Filters

Connector Cap
The APSystems 2060401006 Male DC Connector Cap is a cylindrical gray metal part featuring a flanged base and a small hole at the edge, perfect for YC600 installations. It appears isolated on a white background.

APSystem 2060401006 Male DC Connector Cap

$1.65 - $1.65
$1.65
$1.65 - $1.65
$1.65
In stock

The APsystems MC4 Male CAP is intended to cover and secure unused MC4 connectors that come from the second pair of YC600 or QS1 DC connections. Thi...

View full details
$1.65 - $1.65
$1.65
$1.65 - $1.65
$1.65
Connector Cap
Close-up of an APSystem 2060402006 Female DC Connector Cap by APSystems, a QS1 cylindrical gray plastic component featuring a hollow center, threaded sections, and a round base with a protruding tab with a hole for possible MC4 mounting or attachment.

APSystem 2060402006 Female DC Connector Cap

$1.65 - $1.65
$1.65
$1.65 - $1.65
$1.65
In stock

The APsystems MC4 Female CAP is designed to cover and secure unused MC4 connectors from the second pair of DC connections on YC600 or QS1 units. Th...

View full details
$1.65 - $1.65
$1.65
$1.65 - $1.65
$1.65
Bus Cable End Cap
The APsystems 2060700017 Y2/3/4-wire Bus Cable End Cap, made by APSystems, features a black plastic construction with a hexagonal nut and ridged body. It is designed for securing and protecting electrical cables such as an AC Bus Trunk Cable as they pass through panels or enclosures.

APsystems 2060700017 Y2/3/4-wire Bus Cable End Cap

$13.51 - $13.51
$13.51
$13.51 - $13.51
$13.51
In stock

An AC Bus End Cap must be used to seal any cut ends of the AC Bus Trunk Cable. This cap is designed for single-use only. Compatibility:  DS...

View full details
$13.51 - $13.51
$13.51
$13.51 - $13.51
$13.51
Connector Cap
The APsystems 2061702007 Bus Connector Cap by APSystems is a black, oval-shaped connector made of plastic, featuring a smooth finish with two rectangular cutouts on each side. Designed for use in solar energy systems, it includes an engraved arrow symbol for orientation.

APsystems 2061702007 Bus Connector Cap

$4.29 - $4.29
$4.29
$4.29 - $4.29
$4.29
In stock

Enhance the reliability of your solar energy system by using the APsystems Bus Connector Cap, also known as the Y-Conn Cap. Designed for DS3, YC60...

View full details
$4.29 - $4.29
$4.29
$4.29 - $4.29
$4.29
Gateway
The APsystems ECU-R Residential Monitoring Gateway is a white wireless network device with two antennas, displaying the APsystems logo and a QR code on the top surface. Specifically designed for solar array monitoring, this gateway includes two small indicator lights on the side to ensure efficient tracking of inverter performance data.
APSystems ECU-R Residential Monitoring Gateway_1

APSystems ECU-R Residential Monitoring Gateway

$336.32 - $336.32
$336.32
$336.32 - $336.32
$336.32
In stock

The APsystems Gateway serves as the information hub for APsystems inverters. It gathers and transfers performance data from each module, providing ...

View full details
$336.32 - $336.32
$336.32
$336.32 - $336.32
$336.32
Microinverters
The image displays the APSystems Microinverter DS3-L, a black unit with dual MPPT capabilities and multiple connectors, showcasing a sleek design. The APsystems logo is prominently upfront, highlighting its grid-interactive features.
Save 23% Save %

APSystems Microinverter DS3-L

$239.90
$239.90 - $239.90
$239.90
$185.20
$185.20 - $185.20
$185.20
In stock

APsystems' DS3 series is the 3rd generation of dual-module, single-phase microinverters, offering peak performance with 97% efficiency for high-cap...

View full details
$239.90
$239.90 - $239.90
$239.90
$185.20
$185.20 - $185.20
$185.20
Save 23% Save %
Bus Cable
Three APSystems Y3 Bus Cables - 2M, black with connectors, are side by side. The cables feature a 2-meter drop on one side and a 1-foot drop on the other for YC600 & QS1 compatibility.
The APSystems Y3 Bus Cable - 2M, a black electrical connector featuring three prongs and two attached cables, is displayed against a white background.
Save 23% Save %

APSystems Y3 Bus Cable - 2M

$47.90
$47.90 - $47.90
$47.90
$36.67
$36.67 - $36.67
$36.67
In stock

APsystems 2-Meter Y3 AC Bus Trunk Cable connects the microinverters in a branch into a single output. Use it with YC600Y and QS1 microinverters. Th...

View full details
$47.90
$47.90 - $47.90
$47.90
$36.67
$36.67 - $36.67
$36.67
Save 23% Save %
Conduit Fittings
The Bridgeport 1026 3/4 Service Entrance Lb is a gray electrical conduit body with an oval-shaped removable cover secured by two screws. It has threaded side openings, perfect for connecting rigid/IMC conduits in a system.

Bridgeport 1026 3/4" Service Entrance Lb

$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00
In stock

Allows access to the interior of a conduit system for inspection, pulling, and maintenance. Compatibility:  Rigid/IMC Conduit

$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00
Reducing Washer
The Bridgeport 1063 1" To 3/4" Reducing Washer by Bridgeport is a galvanized steel washer featuring the size engraved as "1" to 3/4"." This circular washer, with dimensions ranging from 1 inch to 3/4 inch, includes a central hole and has a slightly weathered appearance.

Bridgeport 1063 1" To 3/4" Reducing Washer

$0.51 - $0.51
$0.51
$0.51 - $0.51
$0.51
In stock

Applications: Galvanized steel-reducing washers are used in pairs to reduce the size of knockout holes in boxes or enclosures. Reducing size: 1 ...

View full details
$0.51 - $0.51
$0.51
$0.51 - $0.51
$0.51
Reducing Washer
The Bridgeport 1065 1-1/4 to 3/4 Reducing Washer is made of galvanized steel, featuring engraved numbers and markings along its circular edge, a central knockout hole, and a slightly worn appearance.

Bridgeport 1065 1-1/4" to 3/4" Reducing Washer

$0.59 - $0.59
$0.59
$0.59 - $0.59
$0.59
In stock

Applications: Galvanized steel-reducing washers are used in pairs to reduce the size of knockout holes in boxes or enclosures. Reducing size: 1-...

View full details
$0.59 - $0.59
$0.59
$0.59 - $0.59
$0.59
Sealing Locknut
A metal washer with yellow rubber lining, viewed from the side, highlights a circular design with tabs on the outer edge similar to a Bridgeport 3/4" Sealing Locknut. The rubber center is particularly noticeable.
The Bridgeport 142 3/4" Sealing Locknut is showcased from an angle against a white background, featuring a yellow interior gasket and a raintight seal for enhanced durability.

Bridgeport 142 3/4" Sealing Locknut

$1.99 - $1.99
$1.99
$1.99 - $1.99
$1.99
In stock

Steel locknut with PVC seal provides a raintight seal when fastening threaded conduit to an unthreaded opening in a box or enclosure.

$1.99 - $1.99
$1.99
$1.99 - $1.99
$1.99
Watertight Hub
Close-up of the Bridgeport 152-DC 3/4 Watertight Hub, a zinc die-cast electrical connector with a green rubber seal. The rigid, cylindrical conduit has threaded ridges and a hexagonal section for tightening. Its silver surface appears sturdy and industrial.

Bridgeport 152-DC 3/4" Watertight Hub

$8.88 - $8.88
$8.88
$8.88 - $8.88
$8.88
In stock

Threaded Hub, Zinc Die Cast, Size 3/4 Inch Used to secure threaded rigid service entrance conduit to a box or enclosure Rated to 105°C Compatibil...

View full details
$8.88 - $8.88
$8.88
$8.88 - $8.88
$8.88
Off Set Nipple
The Bridgeport 1522DC 1 Offset Nipple is a metal conduit fitting with two threaded ends featuring NPSM threads. Designed for electrical conduits, it has a slightly curved middle and appears to be crafted from durable materials.
The Bridgeport 1522DC 1 Offset Nipple, made of die cast zinc with NPSM threads and dual threaded ends, is ideal for connecting pipes or tubes at angles in electrical conduit setups where precise alignment is essential.

Bridgeport 1522DC 1" Off Set Nipple

$7.00 - $7.00
$7.00
$7.00 - $7.00
$7.00
In stock

Use the Bridgeport 1522-DC 1" Die Cast Zinc Offset Conduit Nipple to offset a conduit system between two raceways, boxes, or enclosures with differ...

View full details
$7.00 - $7.00
$7.00
$7.00 - $7.00
$7.00
Threaded Hub
The Bridgeport 153DC 1 Threaded Hub is a metallic electrical conduit connector with a green plastic insert and insulated throat for safety, featuring a threaded end and ridge to secure cables in watertight setups, ensuring robust joins in rigid conduits.

Bridgeport 153DC 1" Threaded Hub

$13.25 - $13.25
$13.25
$13.25 - $13.25
$13.25
In stock

Designed to securely attach threaded rigid service entrance conduit to a box or enclosure. Features an insulated throat rated for 105°C, ensuring ...

View full details
$13.25 - $13.25
$13.25
$13.25 - $13.25
$13.25
Diecast Connector
This image depicts a close-up of the Bridgeport 251RT2 3/4" Raintight Diecast Connector, featuring threaded and hexagonal metallic design elements with a prominent green gasket. Built for plumbing or electrical projects, it guarantees a raintight seal and is ideal for use with EMT conduit systems.
Save 25% Save %

Bridgeport 251RT2 3/4" Raintight Diecast Connector (EMT/Metal enclosure)

$2.67
$2.67 - $2.67
$2.67
$1.99
$1.99 - $1.99
$1.99
In stock

Patented compression-style connector with an internal sealing ring and knockout gasket, ensuring a raintight seal when connecting EMT to a box or ...

View full details
$2.67
$2.67 - $2.67
$2.67
$1.99
$1.99 - $1.99
$1.99
Save 25% Save %
Compression Connector
A Bridgeport 252RT2 1" Raintight Compression Connector, featuring a metallic construction with hexagonal and circular elements, multiple ridges, and a green rubber sealing ring for a raintight seal, isolated on a white background.

Bridgeport 252RT2 1" Raintight Compression Connector

$2.57 - $2.57
$2.57
$2.57 - $2.57
$2.57
In stock

Compression-style connector with an internal sealing ring and knockout gasket. Designed to create a raintight seal when connecting EMT to a box or...

View full details
$2.57 - $2.57
$2.57
$2.57 - $2.57
$2.57
Compression Coupling
The Bridgeport 261RT 3/4" Raintight Compression Coupling by Bridgeport is a cylindrical metallic EMT connector equipped with a hexagonal nut for fastening, designed to securely join electrical conduits and ensure a raintight seal, in compliance with UL 514B standards. Its surface has a shiny metallic appearance.
Save 25% Save %

Bridgeport 261RT 3/4" Raintight Compression Coupling (EMT/EMT)

$2.62
$2.62 - $2.62
$2.62
$1.97
$1.97 - $1.97
$1.97
In stock

Genuine OEM Bridgeport 261-RT 3/4 inch EMT Compression Coupling. Brand new in original Bridgeport factory packaging. ROHS Compliant, made of ball-...

View full details
$2.62
$2.62 - $2.62
$2.62
$1.97
$1.97 - $1.97
$1.97
Save 25% Save %
Compression Coupling
Image of a Bridgeport 262RT 1 EMT Compression Coupling with hexagonal nuts and a circular opening. This shiny-finished connector is ideal for securely joining EMT conduits.

Bridgeport 262RT 1" EMT Compression Coupling

$2.86 - $2.86
$2.86
$2.86 - $2.86
$2.86
In stock

The Bridgeport® 262-RT Compression Coupling is a patented, compression-style coupling used to join two lengths of EMT conduit. It features internal...

View full details
$2.86 - $2.86
$2.86
$2.86 - $2.86
$2.86
Plastic Brushing
The Bridgeport 322 3/4" Plastic Bushing, a black hexagonal plastic piece with a threaded interior, appears designed for use with IMC conduit to secure or fasten components in plumbing or mechanical systems. It is displayed against a plain white background.

Bridgeport 322 3/4" Plastic Brushing

$0.50 - $0.50
$0.50
$0.50 - $0.50
$0.50
In stock

Used with a locknut to terminate threaded rigid and IMC conduit to a box, or with a connector to prevent damage to wire insulation. Rated for ...

View full details
$0.50 - $0.50
$0.50
$0.50 - $0.50
$0.50
Grounding Bushing
The Bridgeport 382DC 3/4 Insulated Grounding Bushing, shown against a white background, features an aluminum alloy build with a circular loop and adjustable screw. Its designed to secure pipes or cables with its clamp mechanism, mounting bracket, and grounding lug for easy installation.

Bridgeport 382DC 3/4" Insulated Grounding Bushing

$5.09 - $5.09
$5.09
$5.09 - $5.09
$5.09
In stock

Used with a locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to the neutral busbar. Grounding lug material is al...

View full details
$5.09 - $5.09
$5.09
$5.09 - $5.09
$5.09
Grounding Brushing
The Bridgeport 383DC 1 EMT Zinc Die Cast Grounding Bushing features a silver metal clamp with a round opening lined with black rubber for wire insulation. It includes three screws, including one side screw for tightening, ensuring secure conduit termination. It is isolated on a white background.

Bridgeport 383DC 1" EMT Grounding Brushing

$5.36 - $5.36
$5.36
$5.36 - $5.36
$5.36
In stock

The Bridgeport 383-DC 1″ Zinc Die Cast Insulated Grounding Bushing terminates conduit to a cabinet with a locknut. The bushing features a plastic m...

View full details
$5.36 - $5.36
$5.36
$5.36 - $5.36
$5.36
 
The Bridgeport 670-DC2 Strap-Type Connector, made from zinc die cast, features a threaded end and dual screws for securing electrical cables. With a shiny silver finish, it is ideal for service entrance applications.

Bridgeport 670-DC2 3/4" Strap-Type Connector

$1.55 - $1.55
$1.55
$1.55 - $1.55
$1.55
In stock

The Bridgeport 3/4″ Zinc Die Cast Service Entrance Oval Cable Connector securely connects the oval service entrance cable to a box or enclosure. ...

View full details
$1.55 - $1.55
$1.55
$1.55 - $1.55
$1.55
EMT Straps
The Bridgeport 921S 3/4 One Hole EMT Strap is a zinc-plated steel, U-shaped clamp with a pre-drilled hole, ideal for securing pipes or cables in electrical metallic tubing applications.
The Bridgeport 920-S 1/2 One Hole EMT Straps by Bridgeport are zinc-plated steel with a semicircular arch and flat extension with a circular mounting hole, ideal for securing electrical metallic tubing to surfaces.

Bridgeport 920-S 1/2" One Hole EMT Straps

$1.75 - $1.75
$1.75
$1.75 - $1.75
$1.75
In stock

Bridgeport One Hole EMT Pipe Straps secure electrical metallic tubing (EMT) to various mounting surfaces. Zinc Plated Steel construction offers a t...

View full details
$1.75 - $1.75
$1.75
$1.75 - $1.75
$1.75
EMT Straps
The Bridgeport 921S 3/4 One Hole EMT Strap is a zinc-plated steel, U-shaped clamp with a pre-drilled hole, ideal for securing pipes or cables in electrical metallic tubing applications.
The Bridgeport 921S 3/4 One Hole EMT Strap is zinc plated steel with a curved design and smooth, shiny finish, perfect for securing electrical metallic tubing or cables to surfaces.

Bridgeport 921S 3/4" One Hole EMT Strap

$0.35 - $0.35
$0.35
$0.35 - $0.35
$0.35
In stock

Bridgeport One Hole EMT Pipe Straps secure electrical metallic tubing (EMT) to various mounting surfaces. Zinc Plated Steel construction offers a t...

View full details
$0.35 - $0.35
$0.35
$0.35 - $0.35
$0.35
Conduit Fittings
The Bridgeport LB-42CG 3/4 Lb-Type aluminum conduit body with cover and gasket is shown against a white background. Featuring a removable lid secured by two screws, its ideal for 90-degree cable pulls and designed for connecting and routing wires in IMC/Rigid Conduit systems.
The Bridgeport LB-42CG 3/4 Lb-Type Aluminum Conduit has a gray finish, compatible with IMC/Rigid Conduit, and includes two side openings for 90-degree cable pulls. It comes with a metal cover secured by two screws and a gasket.

Bridgeport LB-42CG 3/4" Lb-Type Aluminum Conduit W/Cover & Gasket

$9.49 - $9.49
$9.49
$9.49 - $9.49
$9.49
In stock

Bridgeport-type LB conduit bodies allow access to the interior of a conduit system for inspection, pulling, and routine maintenance. Specifically ...

View full details
$9.49 - $9.49
$9.49
$9.49 - $9.49
$9.49
Conduit Fittings
The gray Bridgeport LL42CG 3/4" LL aluminum conduit body includes two threaded openings positioned on opposite sides and a detachable metal cover secured with screws, integrating seamlessly into rigid conduit systems.
The Bridgeport LL42CG 3/4" LL Aluminum Conduit is a rectangular metal electrical conduit body, designed for IMC and rigid conduit connections with threaded openings on both sides. It includes a screw-fastened cover and features a smooth gray finish.

Bridgeport LL42CG 3/4" LL Aluminum Conduit

$9.49 - $9.49
$9.49
$9.49 - $9.49
$9.49
In stock

Threaded bodies for rigid conduit or IMC allow access for inspection, pulling and maintenance.

$9.49 - $9.49
$9.49
$9.49 - $9.49
$9.49
Conduit Fittings
The Bridgeport LR42CG 3/4" LR Aluminum Conduit, produced by Bridgeport, is a gray metal T-shaped conduit body with a cover. It has two threaded openings designed for IMC or threaded rigid conduit connections. The cover is secured using screws and is labeled with specifications for easy inspection.
The Bridgeport LR42CG 3/4" LR Aluminum Conduit features a gray body with two threaded openings on either side, accompanied by an oval removable cover for easy inspection. It is secured with two screws and is designed to connect and protect IMC or threaded rigid conduit in both industrial and residential environments.

Bridgeport LR42CG 3/4" LR Aluminum Conduit

$9.49 - $9.49
$9.49
$9.49 - $9.49
$9.49
In stock

Designed for threaded rigid conduit or IMC, providing access for inspection, pulling, and maintenance tasks.  

$9.49 - $9.49
$9.49
$9.49 - $9.49
$9.49
Junction Box
The Cantex 5133709 J Box 4x4x4 is a robust, grey, rectangular junction box tailored for marine applications. It features a flat lid and four screw mounts at each corner, showcased against a plain white background to emphasize its durable construction, making it ideal for housing electrical devices in challenging environments.

Cantex 5133709 J Box 4x4x4

$21.67 - $21.67
$21.67
$21.67 - $21.67
$21.67
In stock

The Cantex 5133709 Junction Box is designed to support electrical devices and fixtures. It allows multiple conduits to be connected and wire splice...

View full details
$21.67 - $21.67
$21.67
$21.67 - $21.67
$21.67
Junction Box
The Cantex 5133710 J Box 6x6x4 is a perfect choice for marine applications. This gray rectangular plastic junction box features a flat lid, secured by screws at each corner, and comes with mounting tabs on the sides for easy installation. With its simple and functional design, it is ideal for housing electrical connections in various settings.

Cantex 5133710 J Box 6x6x4

$22.59 - $22.59
$22.59
$22.59 - $22.59
$22.59
In stock

The Cantex 5133710 Junction Box is designed to support electrical devices and fixtures. It allows multiple conduits to be connected and wire splice...

View full details
$22.59 - $22.59
$22.59
$22.59 - $22.59
$22.59
Junction Box
The Cantex 5133712 J Box 8x8x4, from the renowned brand Cantex, is a gray PVC enclosure box with a flat, square lid and smooth sides. The lid is securely fastened with screws at each corner and includes a mounting bracket on one side, making it ideal for surface-mounted applications. Its clean surface showcases a subtle embossed logo.
Save 16% Save %

Cantex 5133712 J Box 8x8x4

$59.90
$59.90 - $59.90
$59.90
$50.15
$50.15 - $50.15
$50.15
In stock

The Cantex 5133712 Junction Box is designed to support electrical devices and fixtures. It allows multiple conduits to be connected and wire splice...

View full details
$59.90
$59.90 - $59.90
$59.90
$50.15
$50.15 - $50.15
$50.15
Save 16% Save %
Junction Box
Introducing the Cantex R5133713 J Box 12x12x6, a gray, metallic square junction box featuring a flat top and slightly raised edges. This junction box has a smooth finish and is securely fastened at each corner with screws. Designed specifically for marine applications, it comes with a protruding tab on one side equipped with a rounded hole for easy mounting or attachment.

Cantex R5133713 J Box 12x12x6

$104.31 - $104.31
$104.31
$104.31 - $104.31
$104.31
In stock

The Cantex 5133713 Junction Box is designed to support electrical devices and fixtures. It allows multiple conduits to be connected and wire splice...

View full details
$104.31 - $104.31
$104.31
$104.31 - $104.31
$104.31
Electrical Wire
A large spool of CME 12 AWG GRN 500ft electrical wire by CME, featuring green color with yellow stripes, neatly wound and resting against a white background.

CME 12 AWG GRN 500ft

$99.00 - $99.00
$99.00
$99.00 - $99.00
$99.00
In stock

$99.00 - $99.00
$99.00
$99.00 - $99.00
$99.00
Electrical Wire
A large spool of 12 AWG white electrical cable from CME, coiled neatly on a black plastic reel, with part of the wire slightly unraveled.

CME Wire 12 AWG WHT 500ft

$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00
In stock

$105.00 - $105.00
$105.00
$105.00 - $105.00
$105.00
Circuit Breakers
Eaton 200AMP Main Breaker 2Pole_1
Save 16% Save %

Eaton 200AMP Main Breaker 2Pole

$362.90
$362.90 - $362.90
$362.90
$304.42
$304.42 - $304.42
$304.42
In stock

Eaton 200AMP Main Breaker 2Pole has the following features: Two-pole breakers are 120/240 Vac, field installed Bolt-on type circuit breakers used ...

View full details
$362.90
$362.90 - $362.90
$362.90
$304.42
$304.42 - $304.42
$304.42
Save 16% Save %
Fuse Reducers
From the Eaton Bussmann Series, there are two copper-colored electrical wire connectors. The left one is a tubular terminal with a flared end, while the right is an Eaton 263R Bussmann Series Class R Fuse Reducer, featuring cutouts for clipping or clamping in 60 A electrical installations.
The image features two Eaton 263R Bussmann Series Class R Fuse Reducers, both labeled for 30A use. One copper connector is shown upright with its cylindrical form, while the other is placed sideways, highlighting its rectangular attachment end against a white background.

Eaton 263R Bussmann Series Class R Fuse Reducers 30A to 60A

$17.13 - $17.13
$17.13
$17.13 - $17.13
$17.13
In stock

Eaton Bussmann Series Class R Fuse Reducers Rating: 60 A Type: Class R, Non-indicating Compatible with fuses up to 30 A Voltage: 250 V Box quanti...

View full details
$17.13 - $17.13
$17.13
$17.13 - $17.13
$17.13
Meter Hub
Positioned at an angle on a plain white background is the Eaton ARP00002CHBCS 125A Meter Hub Enclosure, featuring a single blade, central screw design reminiscent of sturdy NEMA 3R enclosures.
Featuring a square, beige plastic cover and a central circular metallic screw marked with the numbers 2 and 8, this smooth-surfaced item appears to be an Eaton ARP00002CHBCS 125A Meter Hub Enclosure or potentially an electrical fitting suitable for NEMA 3R enclosures.

Eaton ARP00002CHBCS 125A Meter Hub Enclosure

$10.56 - $10.56
$10.56
$10.56 - $10.56
$10.56
In stock

The Eaton Cutler-Hammer 2 in. The Hub Closure Plate is designed to fit in meter sockets. This design is rated as NEMA 3R meaning that it provides a...

View full details
$10.56 - $10.56
$10.56
$10.56 - $10.56
$10.56